Fiber Laser Cutting Machine Detail Cutting Process
Numerous clients will experience some cutting innovation issues while utilizing fiber laser cutting machine. Today we will sum up in Fiber Laser Cutting Machine detail cutting cycle. Furthermore, desire to help clients of Laser Cutting Machine. The laser cutting process is mainly divided into three kinds of conditions: 1. Cutting speed is too fast- If the cutting speed is too fast, the following results may cause. 1) May not be cut through, sparking sparks. 2) Some areas can be cut through, but some areas can not be cut through. 3) The whole section is coarser, but it does not produce dissolving. 4) The cutting section incline stripe, and the lower part produces stains. 2. The cutting speed is too slow 1) Cause over melting, the cutting surface is more rough. 2) The slit widen and the sharp corner dissolve in the whole. 3) Influence cutting efficiency. 3. Determine the appropriate cutting speed Judging whether feed speed can be increased or slowed down from cutting spark 1) Sparks spr...